Massca Dowel Jig X Storage Case

Storage case for the Massca Dowel Jig X and accessories. Unused collets store on the associated drill bits. Space for the hex key used on he depth stops. 6x2mm magnets used to hold sides together, press fit or ream out with 6mm reamer and superglue.

If you find any errors or issues, send me a message and I'll update the model.

Print Settings:

No special settings needed, but below is what I used.

PLA Matte

0.4mm Nozzle

0.2 layer height (I normally use adaptive variable layer height)

Arachne Walls

Adaptive cubic infill - 15%