Ender 3 (pro / V2) Y brace Fixed Left Side

Copy pasted the original models fits to help out:

fixings needed for V2 are...
4 x M5 x 12mm button head bolts (for the base/leg frame)
1 x M4 x 8mm socket head bolts (to join the 2 halves together)
1 x M4 x 5mm heat set nuts (inserts into the right part)
2 x M5 x 10mm button head bolts (for the bottom of the Y axis frame)
4 x M5 x 8mm button head bolts (for the side of the Y axis frame)
6 x M5 slide nuts (for the Y axis frame)
you will need to tap (M5) the right leg / base extrusion to accept the M5 x 12mm button head as this is not done from factory.
if you wish, you may not need all of the fixing points for the Y axis but i will leave that to your discretion.
print settings are what ever you deem necessary but i use the Voron print settings as i print in an enclosure and a lot of ABS. so it gets quite warm in there. (50 deg C)
my recommendations....
4 perimeter
5 top / bottom
40% infill.
thank you for looking at my mod and Happy printing!

Made mesh edit 1.27mm higher left brace.