Bulkhead Mount for Single Power Pole Pair

This is a simple model that holds a single Anderson Power Pole PP45 size pair to a bulkhead or panel.
1
4
0
26
updated January 29, 2025

Description

PDF

The PP45 pair is held to the mount with a roll pin, #2-56 screw, or a 3/32 inch cotter pin.  

The mount can be fastened to the panel with two #4-40 screws.

A diagram is attached that shows the hole spacing and alignment.

 

The part was originally designed for SLA printing, but FDM printing is acceptable as well.  The Power Pole retention holes may have to be drilled out to create the proper clearance for a roll pin. 

 

For FDM printing, I recommend the following settings:

  • 0.2mm Layer
  • 3 walls
  • 95% infill
  • Enable support (for the retention holes)

 

Tags



Model origin

The author marked this model as their own original creation.

License