Old Kregh Foreman Fence Stop

This is a Old Kreg Foreman Fence Stop. Kreg no longer sells them. It is the swinging triangle part. I sized the hole in it to be tapped ¼-20. You can also drill that hole out with a 9/32 drill and install a ¼-20 E-Z LCK wood insert. Use a soldering iron and slowly insert the insert in the print. I printed mine in PLA at 20% fill and it is strong enough but adjust as you want.  There is a right and left so invert the print if you care. The long straight edge is in front. Enjoy.