Clogless Shower Drain Plug

A shower drain plug thats designed to direct hair and other debris down one of the four slots of a traditional twist-and-turn shower drain plug.

Installation:

Remove twist-and-turn shower drain plug by twisting it counter-clockwise when its locked, or loosening the Phillips screw under the “cap” and twisting the remaining rod out.

May not drain well for plugs <40mm diameter, use Shower Drain (half).stl

Files:

Shower Drain.stl - works for most drains, completely diverts debris

Shower Drain (half).stl - works best for smaller drains (<38mm), partially diverts debris

Printing:

TPU preferred, PETG also works.

Press-fit tolerance, scale to 99% or 101% depending on your elephant's foot.

41mm diameter, scale to adjust as necessary.

           measured diameter (mm) 
scale % =   --------------------    * 100
                  41 mm