iFixit Manta Gridfinity

Bin to hold ifixit's manta screwdriver set
3
10
0
74
updated January 29, 2025

Description

PDF

6x5 gridfinity bin to hold the ifixit manta set (including the lid/top).

This design allows for easy access to all the bits provided but also recessed enough to allow stacking. The weight of the bits holds it down so grabbing a single tool and bit is easy.

It is just barely too large to fit on a prusa plate, so you can cut it in prusa slicer into two halves. Connectors are optional but not really necassary since it will be locked into the gridfinity baseplate. 

The lid slides into the side slightly tucked away (see picture).

You MUST use supports for the overhang. I used the standard grid supports with default settings and they pulled off easily.

Print settings:

Esun PLA+

10% infill

Supports only on enforcers (which should only be needed on the large opening)

 

To take the lid out (e.g. for traveling), I recommend simply flipping the print upside down (the bits are held in the foam), or if printed in two pieces just pull apart. 

Tags



Model origin

The author marked this model as their own original creation.

License