This model has the following
- Car Mount To attach the base to a surface with some double sided tape or adhesive of your choice
- Arms (Print as many as you like to extend it however far 2 are included on the plate)
- Device Mount to mount the device at the end
- Device Plate that you can modify to make something attach to this or to print and attach to an existing item to be able to mount it
- 3 Knobs for tightening the M5 bolts
In addition you will need
- 3 M5 Bolts ~30mm in length
- 3 M5 Nuts
- Adhesive for attaching the base plate
Tags
The author marked this model as their own original creation.