Samsung SSD micro case
shrunken case for samsung ssds meant to take up as little space as possible for portable drive use or cramming drives
1
18
0
95
updated January 31, 2025
Description
PDFA re-casing for internal samsung 2.5in ssd drives for conversion into portable drives or super small storage drives in a small form factor case
lid prints best on its head
PLA works fine but if your use case requires your drive to be out in the sun or tossed around in a bag etc. I recommend PETG or similar.
BOM
- original mainboard screws x3
- m3x5 screws (button heads recommended)
- top and bottom shells
Model origin
The author remixed this model.
Differences of the remix compared to the original
- downsized the case quite a bit for my own use cases and to utilize minimal amounts of plastic while maintaining strength
- added countersunk screw holes for the outer shell to slim the overall package by a couple mm
- because of the changes made to the shape of the case it is more than likely no longer compatible with atomos ninja rails
