Silverchair Magnet (multi-color)(8x3mm magnets)

Silverchair Band
0
3
0
9
updated January 29, 2025

Description

PDF

Pictured Examples printed on a BambuLab X1C (Textured PEI)


Face-down Print Settings:
Initial Layer Line Width: 0.4mm
Wall Generator: Arachne
Wall Loops: 1
Bottom Surface Pattern: Hilbert Curve
Infill: 15% (Gyroid)
Initial Layer Speed: 30mm/s

 

Coloring: Prints have at least two main objects that I usually set as white (base) and black (outline). Play around here until you find the color combination you like. I kept the base white on this to keep the letters white.


8x3 Magnet recesses to allow gluing in the magnets easily (magnet strip can be used instead)

 

Hope you enjoy!


(see my profile for other multi-color prints, as well as face-up manual color print designs if you don't have a multi-material option)

Tags



Model origin

The author marked this model as their own original creation.

License