This is a pocket to replace the factory single DIN radio and should work on all model years (tested on a 2007). There's two versions, long and short but both will work with the factory radio brackets to mount. Try to use a M5 screw that's 5mm long or a heat set insert with matching screw.
Long version has the same dimensions as the factory radio which is 171mm deep. The internal dimensions are 170mm x 42mm x 155mm (WxHxD)
Short version is 10mm shorter depth wise with internal dimensions of 170mm x 42mm x 145mm (WxHxD).
Parts needed
Printing - I'm still fairly new and I'm pretty sure there's better print settings but it did come out pretty solid. I printed this on a P1s using Bambu ASA (black) with Bambu Studio using the default wall/shell/infill settings and just enabled support (tree/slim)
The author marked this model as their own original creation.