For best results and minimal layer lines, use a fine layer height (around 0.1–0.12 mm) and slower print speeds to capture small details—particularly in the face and hair. PLA or PETG both work well; PLA is often easier for beginners. Consider adding supports under the chin and arms. Infill at 10–15% is generally enough for a solid result without excessive material use. Once printed, lightly sand any rough edges and, if desired, prime and paint to complete the Funko-style finish. Of course, everyone’s setup is different—feel free to experiment with settings for your preferred balance of print time and surface quality!
The author marked this model as their own original creation.