Ikea Couch Bed Feet Support Repair

The Hook on an old ikea couch bed broke which supports the laying and seating area. This should have fixed that.
0
1
0
9
updated January 28, 2025

Description

PDF

This is an obscure one. But maybe someone might search exactly this. 

Disclaimer: i never printed or tested it. 

The hook which keeps the seating area of a folding ikea couch bed up, broke off after decades of use. So i designed this, which should fit. I never tested it, because the owner repaired it with something else before i could finish the print.

The hook is about 22cm off the ground and 3cm to either left or right. The feet are connected to the bed base at about 10cm height. the diameter of the foot is 6cm.

The print is in two parts, the lower part, with supports the upper part. The upper part can be rotated either to use on the right or the left foot of the bed. 

It should be thick and sturdy enough. Print with more walls (I would use 4) and high infill (50-60%). I added a modifier in the slicer to make the area where the bed lays on the hook to be 80% infill.

Tags



Model origin

The author marked this model as their own original creation.

License