IKEA BEKANT wall spacer

I was struggling for some time with my desk-mounted monitor arm hitting my wall, not being able to comfortably manage my cables and also my desk being pretty unstable when applying some force to it.

I decided to make a simple print once i got my 3D Printer to mitigate this issue, just print two pieces and put them at any side of your desks wall-facing edge (preferably in both corners).

Recommendations

You may want to add some electrical tape or similar in the interior for a better fit and to avoid scratching the table surface, but you can also just use it vanilla as the spacers don't move an inch once they are up against the wall. I strongly recommend to glue or double-sided tape some padding to reduce vibrations and improve contact with the wall; my double-sided tape has some padding so i just used it with one side taped.

You can print it in any material and use any infill you want, i used PLA and 10% infill and it was more than enough.