Cosmetics organizer

Description

Introducing the Cosmetics skincare organizer - could be used e.g. for storage day & night daily routine products.

It can easily hold up to three cosmetics products.

There is a small pocket for samples on the left side. The bottom of the pocket is at a 20 degree angle. So you can put samples inside with the open hole facing up to prevent the sample from leaking out. Samples could also be easily taken out.

Printing instruction

• Layer Height: 0.10 - 0.20 mm
• Infill: 15%
• Perimeters: 3
• Bottom Solid Layers:
  • 6 (for 0.20 mm layer height)
  • 12 (for 0.10 mm layer height)
• Top Solid Layers:
  • 5 (for 0.20 mm layer height)
  • 10 (for 0.10 mm layer height)
• Ironing: optional - for better look and possible cleaning of the organizer
• Supports: Not required
• Brim: Not required
• Fuzzy Skin: I recommend using fuzzy skin, so that the organizer would not slip off fingers so easily, e.g. after using some cream when fingers gets greasy