Bleach Case
Somewhere to put your soul reaper stuff.
This is an exclusive model available only to supporters of the creator.
Your funds support the creator's further activity.
1
0
38
updated January 28, 2025
Description
The Bleach case features the best Bleach logo on the top and bottom and a stylish red band around the edges, functional latches and feet so it can stand on its side and is a great addition to Bleach fans collections!
This model requires a 300mm wide print bed. There are two 3MF files provided supporting PrusaSlicer for Prusa XL as well as an unconfigured 3MF file for other printers.
Bill Of Materials
The following items are required to build this model:
- 12x M3 inserts - CNC Kitchen/Ruthex are correctly sized
- 4x M3 nylon lock nuts
- 4x M3x20 hex cap screws
- 4x M3x16 hex cap screws
- 4x M3x12 hex cap screws
- 4x M3x8 hex cap screws
To install the M3 inserts you will need access to a soldering iron. Please find the build guide attached to this page as a PDF.
Tags
Model origin
The author marked this model as their own original creation.
