Single Extruder/Multi Part FNAF Freddy (fusion360)

Freddy Fazbear of the "Fight Nights At Freddy's" franchise printable in color on a non-mmu 3d printer.
2
11
0
67
updated January 28, 2025

Description

PDF

The fusion file is provided would you want to adjust the tolerances, see how it's done or simply edit the model easily. Additional parts exist there as well (eye pupils and whiskers), these are left out since they are, at default size, to small to assemble. Luckily these parts are black and leaving them out (as a hole) works nearly as well.

 

Printing Information:

  • Use regular adjusted support for all the pieces.
  • When a piece has a flat face, print on it.  For the legs, ears, face and main_body print them on their back. Print the arms palm down. Print the jaw upside down.
  • Use a brim around the small pieces to increase their stability

 

Assembly:

  1. For both eyes, insert the iris in the eyball and add the eyelid on top.
  2. Insert the eyes in the back of the head and use the face to close it off.
  3. Insert the teeth inside the jaw (they are numbered from left to right while facing freddy) and insert the jaw into the head
  4. Insert the bow into the main_body
  5. Then you can simply insert the rest of the parts in any order.

 

Thanks to @lydiahalteh on MakerWorld for the suggestion.

 

Note that while this model is free to use, keep in mind that the character it's based on is property of the fanf company, so you should ask permission to the owners would you want to use it commercially.

Tags



Model origin

The author remixed this model.

Freddy Fazbear
by pixeldonovan (thingiverse.com)
 

Differences of the remix compared to the original

I scaled, repaired, sliced up the model to make it printable without an MMU and added some parts in the same idea.

License