Tommee Tippee Bottle-Brush Holder

Wall-mountable holder for Tommee Tippee Essentials Bottle Brush.

Print settings

Layer height: 0.32 mm

Line width: 0.6 mm (my nozzle is 0.4 mm)

Wall line count: 2

Infill: 20% Tri-Hexagon is plenty strong enough.

Supports: none

I printed with the back on the bed; and with Lines as the top/bottom pattern, with the line direction to be vertical when the hook is on the wall; all so that water in theory runs down easier.

Post-printing

I designed the width for a medium Command Strip.

How I designed this

In Tinkercad.  Edit it online.