Fish Fry Box could not find anything like it, also i needed it to be easy and fast to print. also some of the ones i saw online took hours to print and some were just not free😠so i came up with this design i looked at all the problems from all the other ones and made it simple and easy to print no need for them pesky supports😼 i printed it with PETG .20mm 5% infill no supports. there is .1mm of free space where the walls slot in. The hooks that make it hang on the glass are 3.2mm wide it fit on my 10gal rimless.
assembling it is easy just make sure you put the walls on correctly ( tight fit )
if you have any questions feel free to ask ☺
ill be working on bigger fry boxes and making a floating version.
Print the walls flat
For More models https://makerworld.com/en/@MSPRINTZZ
The author marked this model as their own original creation.