Retainer for 120mm SSD mount.

Just a little retainer so the drives aren't flopping around.
2
4
0
37
updated January 27, 2025

Description

PDF

To be used with this: https://www.printables.com/model/534247-120mm-fan-to-6-25-ssd-mount

Designed to print without supports. You'll need +6mm long M3 screws since the original model didn't designed the holes to use standard computer screws.

Tags



Model origin

The author remixed this model.

Differences of the remix compared to the original

It's the same model with same hole spacing, but I cleaned it up and removed the parts that weren't needed.

License