Aquarium Light Riser for Large Aquariums

Aquarium light riser for larger aquariums that have a middle split section.
1
6
0
74
updated January 27, 2025

Description

PDF

This model was inspired by another aquarium riser design that I liked and used for my 50 gallon aquarium (https://makerworld.com/en/models/643354#profileId-950382), however I had a couple issues when I tried to use it for my larger 150 gallon aquarium, one was that the rim border was larger on the sides of my aquarium (approximately 20mm), and the second was that I needed a center piece that would bridge two lights together in the middle of the aquarium.  I searched and couldn't find any that fit these two cases, so I felt I would try making my own.

Two side pieces and middle piece on 150 gallon aquarium.

 

This is my first time designing and making a 3D model, so please let me know if any mistakes in it.  The print profile includes the side piece which will need two of, and center piece that will fit a center rim of about 25mm.  The riser is a little under 6 inches tall.  I have included the measurements in the screenshots and the step files for anyone that would like to edit it themselves.  In the 3mf file is a plate for test prints that will allow people to quickly test (<25 min) if the risers will fit their aquarium or not.  I hope people find it useful.

Tags



Model origin

The author marked this model as their own original creation.

License


Highlighted models from creator

View more