Unbreakable Kenlin Rite Trak 1 Drawer Track Guide and Glide

Replaces and upgrades Kenlin Rite Trak 1 Drawer Track Guide and Glides

Fits manufactures such as Vaughan Bassett, Legacy, Pulaski, Lexington and others.

Made to be as strong as possible instead of as cheap as possible.  These go on tight, you'll need to bump the drawer with your hip when putting the drawer in the first time.  The slide action is also stiffer at first, wax helps lubricate without gathering dust.

Note that if you've broken your original ones, you may have bent the metal track on the bottom of the drawer.  To fix that, gently hammer the metal rails back into place, as flat as you can.

Printed in generic PETG on a Qidi Plus 4.  

The drawer side will need to be flipped 180, print with or without supports.

If printing with supports, I suggest tree supports with a 1mm xy separation on the first layer.

Took this model and confirmed with calipers against my existing injection molded parts. Re-created the design in Fusion360 from sketches, made it as strong as possible, studying how the parts and drawer interact in my furniture.  These are a little tight at first, but with some wax (soft candle wax works fine, dripped on) you'll have drawer glides that won't break.