Keytags for usage with Brother P-Touch tapes

I was in need of a simple keytag, which i could label with my Brother P-Touch labels. These TZ(e) tapes are coming in different flavours, so i made a bunch of different sizes.

The have rounded edges and a small chamfer at the top and button, so that they sit nicely in the hand and don't scratch anything.

The surface for the sticker is slightly recessed so that the stickers do not come off easily.

I made them for 6 mm, 9 mm and 12 mm tapes. There is a folder for each tape width and in this folder there are different lengths for that tape width. 

The file naming “filetag_9x35” indicates a 9mm tape width and a sticker length of 35 mm. All of them are 3mm high and best printed with .2 layer height.

I printed them in PETG for a bit more flex, but any other filament will be fine.

It's a quick print and maybe thy are helpful to some folks.

If there is a need for other dimensions, just let me know.