Caliburn 4 single piece rail 1mm longer

Single piece rail for Captain Slug's Caliburn 4 that is 1mm longer
0
1
0
20
updated January 27, 2025

Description

PDF

After assembling my blaster I found the pieces were loose and rather than glueing them I wanted a single model which I could then split, and join with a squad plug. I've also since printed a single piece, which printed fine with a brim (I did not try without).

I then found that it was still a bit loose as the model was too short, so I extended the front by 1mm for a perfect fit.

Tags



Model origin

The author remixed this model.

Caliburn 4 - Homemade Nerf Blaster
by captainslug (thingiverse.com)
 

Differences of the remix compared to the original

Joined parts C1(x4) and C2 into a single model and extended the front by 1mm.

License