10 dart Mag for Lonx

I made this 10 dart Mag to suit my Lonx. 

I liked Astropulse's Mag but it needs trimming to fit.

So I remodelled the body incorporating the bottom cap and the dart follower from Astropulse's Mag. I made the bottom cap a tighter fit and removed the locking plate. I also added a dart indicator to the dart follower so you can tell when empty without having to pull the mag out. 

When orange is no longer visible then Mag is empty. See photos.

I used the spring made by Nick_Furry and just trimmed it slightly to suit after printing.

Printed all parts in PLA except Spring in PET.

The follower can be printed to have the indicator on either side. Front or back.

Supports for the front of the mag only. Print horizontal with the notch facing down

printed 0.20mm

10% infill

Support enforcers only 
 

Edit: Widened the gap at the top slightly, so ram passes through without touching. 

Edit: The sloped back on the follower is causing the darts to rock and jam. Have updated.

Edit: Moved notch slightly to hold mag up higher, now working with no issues so far.

New outer case, modified dart follower, modified end cap.

used the spring by Nick_Furry