LEGO SENNA Goodyear Tyre Tire Wheel Logo FRONT and Back
Remix of Tom Vit Model. be patient with print. Small nozzles and layers help. I just put the logo on the back as well.
4
38
0
292
updated March 29, 2025
Description
PDFREMIXED Wheel for the Lego McLaren MP4/4.
I just put the logos on the inside as well as the original logos on the outside. the MP4/4 had logos on the inside as well so it just a bit more realistic. Its hard to print but i got there eventually, just be patient and don't try to rush the print. I got it to work nicely with Multicolor PLA fyi. 3 walls, 5 top and bottom, 10% infill 0.2mm nozzle and 0.1mm layers (0.15mm first) on a BAMBU P1S
Tags
Model origin
The author remixed this model.
Differences of the remix compared to the original
I just put the logos pon the inside as well as the original logos on the outside. the MP4/4 had logos on the inside as well so it just a bit more realistic. Its hard to print but i got there eventually, just be patient and dont try to rush the print. I got it to work nicely with multicoulr PLA fyi. 3 walls, 5 top and bottom, 10% infill 0.2mm nozzle (0.4 also sort of works) and 0.1mm layers (0.15mm first) on a BAMBU P1S. Have tree support enabled.