Parametric T-Track Bin

Basic bin for use in T-tracks such as those in Benchdogs.co.uk Ultra MFT Workstation or Festool MFT/3 table.

Any T-nut compatible with your T-track should work, however the bins were designed for use with this aligning T-nut.

For the Festool MFT/3, use the T-Nut from Festool's accessories such as their hose mount.

Provided models use M5 bolts.  If using a Benchdogs.co.uk workstation, bolts 16mm to 20mm should work.  Test fit before tightening all the way down to ensure the bolt does not damage T-track.

Edit bin parameters in FreeCAD by changing values in the Parameters spreadsheet found in T-Track Bin.FCStd.

NOTE: So far this has only been tested for use with the Benchdogs.co.uk workstation.