Gridfinity Spice Organizer

In the forever project of organizing our entire house with Gridfinity, we took to organizing our spice rack! We purchased 36 spice bottles from Amazon and printed an organizer for them!

I recognize that the part is very big, so for folks who have smaller printers, you can print 4 of the GridfinitySpiceOrganizer_SMALL.stl part and they should line up perfectly! Or, I've attached the Fusion360 model so you can edit it to your heart's content! All I ask is that you post it on Printables and link back to this post if you do so.

Dimensions

• Gridfinity 7x7
• 294mm x 294mm total dimensions (printed on a Voron 2.4 350mm)

Printing Settings

All print settings are suggestions based on my personal print profile. Other profiles may work, but try them at your own risk!

• Standard Gridfinity print profile
• 0.4mm nozzle
• 0.2mm layer height
• 2 layer walls
• 3 top/bottom layers

Links and Attributions

• Gridfinity (original): https://www.youtube.com/watch?v=ra_9zU-mnl8
• Spice Organizers on Amazon: https://www.amazon.com/dp/B09PMHC2BP