Ori logo LED sign

Reuploaded.

LED sign with the logo from the Ori games. 

ori_diffuser.stl is already oriented for printing, making the first layer front faceing. 

The MMU version is currently UNTESTED! When checking it in slicer, you either need to enable detect thin walls and use gap fill on a 0.4mm nozzle or use a 0.2mm nozzle. 

For LED i used random bigbox store strips, they should be able to wrap around the inside 2 times. (See picture) If you have adhesion issues with the LED strips use CA glue or glue gun. 

I didnt add a hole in the back plate, you'll have to make one yourself depening on where your wires come out, and glue the plate in place.