HSW Swatches box holder

Simple holder for the filament sample box made by Zahg. I tried to keep the hexagonal design pattern, so it is consistent with the Honeycomb Storage Wall.

Two versions: 

• One will press fit into the holes on the HSW inserts
• The other contains the clip, so you can attach it directly into the wall

Keep in mind, the one with the clip requires supports, so it will be slower to print, and will use more material.

Depending on your printer, the press fit version might be a bit loose, use glue, or a flat piece of filament to secure it.

Recommended print settings:

• 4 walls
• 0.2 mm layer height
• PLA is fine
• 25% infill

Pressfit version:

• On its bottom
• No supports needed

Clip version

• Auto orient
• Tree supports (auto)

I used the insert from the original model to make this model fit the HSW.