This holder is designed to secure the majority of hand held power tools in Ryobi's lineup. It can be mounted under a cabinet or workbench as well as vertically screwed into a wall.
Part of the GEN2 modular rail storage system allowing for easy rearrangement. Available HERE
HARDWARE
• Screws: x4 wood self tapping countersunk screws at least 20mm long, max diameter of 5mm. (longer screws can be used to improve hold)
INSTRUCTIONS
• Position tool holder
• Using self tapping screws insert the 4 screws into each corner of the holder.
NOTE: If mounting to wall it is recommended to screw at lease one side of the holder into a wall stud. DO NOT screw into drywall only.
SPECS
Handle opening 52mm wide (I found this width to fit a wide range of tools but there is a bit of variation with Ryobi tools, please measure your tools for verification.)
PRINT SETTINGS
Filament: PLA (PETG or ABS for heavier duty storage)
Nozzle Size: 0.4mm
Print Height: 0.2-0.35mm
Infill: 10-20%
RELATED PRINTS | |
Ryobi Battery Holder | |
GEN2 RYOBI Tool Holder | |
DeWalt Battery Holder | |
GEN2 Hex Bit Drawer Inserts | |
Tool Holders - Milwaukee |
The author marked this model as their own original creation.