Prusa XL Filament Roller [SUMO Enclosure Remix]

Remix of bomtarnes's Prusa XL Filament Roller that works with the SUMO enclosure. 

I removed the foot that slots into the extrusion because the SUMO enclosure panels cover the 3030 aluminum extrusion. I also shortened the bolt carrier so that the bolt had enough length to extend through the enclosure panels and thread into the scrapnel nut. I also extended the base to 90mm to match the base on the stock SUMO “filament holder offset” model.

This is the longer version of the roller body, so you'll also need to print a longer roller from bomtarnes's model.

A standard M5x85mm bolt works with this model.

Removed the foot that slots into the 3030 extrusion, extended the base so it is stable against the plexiglass, and shortened the bolt carrier so it will work with the SUMO enclosure panels.