This enclosure is designed to house a Raspberry PI4 with heatsink and a Samsung T7 SSD.
When you have a similar SSD or heatsink, the maximum dimensions are:
The housing can be mounted using 4mm countersunk screws. PI4 and SSD can be slided in the housing from 1 side. The housing allows for some flex when sliding in the PI's audio jack. A backstop is provided to hold both components in place. All connectors are accessible from slots.
Print is done on a Prusa MK4S and PLA using full supports which removed easily (see slicer file).
The author marked this model as their own original creation.