Picture frame 1.0 (8.5x11in and 9x12in)

To make this model, you will need glue and cardboard.  Cut a piece of cardboard (mine was about 2.8mm thick) to the size of frame you have printed.  The cardboard creates a stable backing for the picture you put in the frame.  Using the pictures provided as reference, glue the model together.  You will need glue at each corner as well as the hanger and the square connectors.  Make sure the connections are stable.  

I'm planning to make a better version of this model with less parts in the future, so stay tuned!

Note: The part “long edge (12in) x2” can actually fit in a MK4 bed, just barely.