LED hosepipe clip 9.5mm

A clip with which you can mount an LED tube.

Who hasn't experienced it? 
You want to mount an LED tube on the wall or under a cupboard or somewhere else. 
The included adhesive strips never stick anyway.

So I created a clip to securely fix the LED tube.

Clip Dimensions:

Width over all: 12mm
Length over all: 30mm
Height over all: 12 mm
Clip height: 10mm
Clip width: 12mm
Clip diameter: 9.5mm

3D printer: Creality K1C
Filament: Sunlu PLA+ White 1.75mm
 

Print Settings:

Layer: 0.20mm
Nozzle temperature: 230 °C
Bed temperature first 3 layers: 70 °C
Bed temperature all other layers: 60 °C
 

Print Time:

1 Piece: 5:04 Min.
15 Pieces: 38:04 Min.

If you need multiple units, you can simply duplicate them 

You need double-sided adhesive Foam tape to mount on the surface.
I use the following: 
Sanjotape Premium PE-Foam Tape 
Art. No. 3204 
EAN 7350092581189 
https://www.amazon.de/Sanojtape-Doppelseitiges-Klebeband-Schaumstoff-Montageband/dp/B06XH2MKFH/ref=sr_1_1?__mk_de_DE=ÅMÅŽÕÑ&crid=31J6D7NC6S1UA&dib=eyJ 2IjoiMSJ9.yZzF1Ajra4licP6SmP0mZQ.LtiKt32gnERxpT-bbGbnBdtdlxPS6kHPg9cTaoC9E9U&dib_t ag=se&keywords=7350092581189&qid=1737900951&sprefix=7350092581189%2Caps%2C60&sr=8-1