3d printed version of 76 Special (scaled up) - RC airplane

There are two version of this one with a T tail and one with traditional inline tail. I printed tail and wings at 2 wall and 3% gyroid .
fuse was printed in vase mode 

Man this was a fast model !
running on DYS X3115 900kv motor with a 10x4.5 prop on 6S 5000mah battery.
AUW - 2Kg (2000gm)

Filament - Lw - pla

Span: 52 inches ( I think - cant remember but it was in the range of 50-55inches)

 

Fiberglass with a 50GSM cloth for extra strength.