Valentine's day rose

Here are the printing settings for each part.

Rose:

•  Printing speed: 40mm/s
• Supports: No
• Layer height: 0.2mm

Stem:

• Printing speed: 25mm/s
• Infill: 95%
• Supports: Yes
• Layer height: 0.2mm

IMPORTANT: 

1. I uploaded a second version of the stem without the leaf because some were experiencing issues during printing.
2. To reduce vibration during printing I recommend printing it with the hole for the joint on the plane.

Connector:

• Layer height: 0.2mm
• Infill: 95%
• Printing speed: 25mm/s

Stand:

• Printing speed: 35mm/s
• Infill: 95%
• Supports: No
• Layer height: 0.2mm

Notes: I recommend to print the base with 30% of infill to reduce the printing time.

Love:

• Layer height: 0.2mm
• Printing speed: 30mm/s

If you have any questions or problems, please contact me.

Thanks! ❤