Raspberry Pi Camera 3 holder - snap fit

This is a quality case/holder/mount/enclosure for the version 3 Raspberry Pi Camera. It snaps together with no additional hardware, screws, or glue.

I printed the case in Polymaker Polylite PETG. I recommend printing in some sort of PETG or other similar non-brittle material. PLA could work, but is not recommended. The snap-fit clips are a bit thin (~1.5mm) so you need a pretty well tuned printer. The case printed great on my Prusa MK4S.

This model has only been tested with and was designed for the Pi cam v3. I cannot guarantee compatibility with other versions.

I designed this model for mounting my Pi cam v3 in my custom enclosure for print monitoring via Prusa Connect. I had to make a “shim” of sorts that angles the camera 15 degrees, this was an afterthought (as you will be able to tell if you remix it using the Fusion360 file 😅) and is optional.

P.S. - I was going to add my print files, but Printables didn't like the custom gcode I have in them to control my enclosure. \_(ツ)_/