Mainframe z16 IBM Logo Plate

Changed the to match the Mainframe z16 - 5 part model

The remix contains the following changes:

1. The bottom 1mm has been cut off
2. The scale has been changed to 59.25% to match a y-height of 10mm
3. The scale has been changed to 93.33% to match a z-height of 1.4mm
4. Added a color change at layer 4 / 0.65mm
5. Perimeter generator CLASSIC

🚨 Important info before you take on this model 🚨

This is a two color print with manual color change

Use the Part 8 Sticker Applicator Tool to place the z16 logo straight

Glue used

Tamiya ABS Cement

Filament used

Bottom part: Prusament PLA Galaxy Black
Top part: Eryone White Silk PLA
Part 8 Sticker Applicator Tool: Prusament PETG Orange

Print settings

Nozzle size 0.25
Layer height 0.15 Structural

Color change
Layer 4 / 0.65mm

Build plate
Textured Steel Sheet

Support my work

Like this model? Donate at https://paypal.me/hjembaek

1. The bottom 1mm has been cut off
2. The scale has been changed to 59.25% to match a y-height of 10mm
3. The scale has been changed to 93.33% to match a z-height of 1.4mm
4. Added a color change at layer 4 / 0.65mm
5. Perimeter generator CLASSIC