Grogu Wall Mount

If you are a Star Wars/Mandalorian fan and own the life-size Grogu doll and want it to have it permanently hovering. This is the wall mount for you. 

It comes in three parts and can be disassembled.

Part 1: Circular/Round  - This part goes around Grogu's neck and is thin enough to bend just a bit to get him in there snug. Use his sweater to hide it from view when mounted. 

The pyramid-shaped part is what you can screw into the wall. The two whole facing away are 5mm in diameter and can take most standard screws. Keep this in mind when selecting a screw.

The pin is the connector of the first two parts. I used 0.4mm of gap so that it will go in relatively easy. However, if that is a concern for you, I would reduce the pin by 5-10%. Use your discretion.