Simple Mini Scissor Lift

Hi, this is my first model that I upload here, so I'm still learning.

It's also my first extensive project in Fusion 360.

To build this project you need at least:

4x arm
2x BaseAndTop
4x largePin
4x mediumPin
8x pinClip

If you want to put 2 central pins, you will have to print 2x medium pin and 2x pinClip separately.

Personally, I used 2x 10-24x1" screw with its corresponding nut, so that when tightened it blocks the height of the support.

I have left the 3mf file so you can see how it is assembled; it is a suggestion.

I accept any comments to improve.

NOTE: I tried adding more arms to make it taller and reach higher and it did work. If you want to replicate it, print a largePin and a mediumPin for each arm, with its proper pinClip. And then 2 mediumPin with their pinClips, for each intersection of the arms.