E3v3se RaspberryPad5 mounting plate

Mounting adapter plate to allow the BTT RaspberryPad5, 3D printed backplate to mount to the original Ender 3 V3 SE screen mounting bracket peg interface. This allows you to mount your Klipper host running KlipperScreen (or anything using the RaspberryPad5) in the same position as your stock screen. 

Holes were included to keep as many ventilation holes open as possible and a cutout on the corner allows access to the captive nut used by the BTT case backplate.

Due to the print orientation, the pegs tend to be a little weak on their own due to the layer lines. To mitigate this, there is a hole through the pegs to allow you to use an M2.5 screw and nut to reinforce the pegs.

As seen in the pictures, I am currently using this on my Ender 3 V3 SE. As far as I know, it should work for the Ender 3 V2 and V2 Neo since they use the same screen mount.