Featherboard for Table saw and router table

Printed at .2 layer with .4 nozzle with 5 layers per wall. I used PETG for flexibility but PLA may work and PLA plus should be good. I printed 1 at 15 percent infill and it worked fine, I also printed one at 25 percent and it felt nice and heavy but performed the same, I think the 25 percent is the way to go.

Update:

2-23-25

I have added half bolts that print in half and can be slid on the dovetail together  a m8 and a m6 with my own threads that will make it easier to print. They will not work with a normal m6 or m8.

I also updated the knobs for the bolt sizes. you can print the unthreaded knobs for steal bolts or print the threaded ones for the bolts I built for the model that are included.

Print profiles are also already inputted.

Added spines so no need to insert yourself and enlarged a bit for strength added knobs and miter slot attachment. 

Update:

2-23-25

I have added half bolts that print in half and can be slid on the dovetail together  a m8 and a m6 with my own threads that will make it easier to print. They will not work with a normal m6 or m8.

I also updated the knobs for the bolt sizes. you can print the unthreaded knobs for steal bolts or print the threaded ones for the bolts I built for the model that are included.

Print profiles are also already inputted.