Hex Holder for LED Tea Lights

A hexagon-themed triple holder/stand for flameless LED tea lights.

Heights are proportioned using the Golden Ratio for aesthetic.

The LED tea lights I used in the photo can be found here: https://www.amazon.com/gp/product/B074RCDB1T/ (This is not a referral link)

If you're using other lights, note that the diameter should not exceed approx. ~37mm.

Use the .step file instead the .stl if your slicer supports it, for higher resolution curves for the holes.

Print settings as shown in the image:

• Bambu Lab X1C
• Generic Black PLA
• 0.4mm nozzle
• 0.2mm layer height (this results in a step pattern on the angled tops BTW)
• 10% gyroid infill
• No supports