Artie Pete and Pete Magnet (multi-color)(8x3mm magnets)

Pictured Example printed on a BambuLab X1C (Textured PEI)

Print Settings:
Initial Layer Line Width: 0.4mm
Wall Generator: Arachne
Wall Loops: 1
Bottom Surface Pattern: Hilbert Curve
Infill: 15% (Gyroid)
Initial Layer Speed: 30mm/s

Coloring: Prints have at least two main objects that I usually set as white (base) and black (outline). Additional coloring was added manually with the paint bucket and other tools. This one was a bit tricky, as it involved the paintbrush to cap off the blue stripes to allow a paint bucket fill without changing the whole outline object's color from black to blue. The extra effort really does turn out nicely, but I apologize for the extra work!

8x3mm Magnets to be glued in (magnet strip can be used instead)

Hope you enjoy!