------- English version follows. -------
Rozměry přesně pro řadu LABE od SLEZÁK - RAV:
Jednoduše nasaďte a naplňte běžným kuchyňským octem. Nechte působit přibližně 1 hodinu, poté sundejte a očistěte baterii měkkým kartáčkem nebo čistým hadříkem. V případě potřeby opakujte.
Tisk z TPU, aby byl pružný a mohl se přizpůsobit baterii při nasazování.
Tisknuto se 3 stěnami, aby nebylo potřeba výplně. Nepotřebujete žádné podpory ani okraj.
------- English: -------
Dimensions precisely for the LABE series by SLEZÁK - RAV:
Just attach, fill with basic kitchen vinegar. Leave on for about 1 hour and then remove and lightly scrub the faucet with soft brush or clean cloth. Repeat if needed.
Print from TPU to be flexible so it could be attached to the faucet.
Printed with 3 walls to avoid infill. No supports or brim needed.
The author marked this model as their own original creation.