Neo Thang Twin

Hello there,

i really liked the Neo Thang design, but I wanted to have 2x 40x40x20 fans.

I also changed the position of the hot end fan, to be slightly more compact.

What you need:

3x M3 heat inserts

3x M3x12mm screws

3x 40x40x20 24v fans

12x 20mm screws (i drilled out the fans of mine, to make room for allen screws, but phillips head screws should be more convenient)

Printing is not easy, if you want a nice looking front.

But if I did it, you can do it too =)

double fans, optimized outlet, more compact design