Cute Frog Water Dish for Reptiles and Amphibians

Take a look at this adorable frog water dish!

I wanted something new for my White's Tree Frogs but I didn't quite find what I wanted. I ended up making this in Fusion 360 to fit my needs.

Specifications: 

• Usable Length is 190mm
• Usable Width is 110mm

Water Depth is 25mm

• Overall Length is 210mm
• Overall Width is ~175mm
• Overall Height is 30mm

When I say usable, I am referencing the main body (the belly) that your pet will have water access to.

The bottom of the water bowl has been colored white to help easily identify any dirt stuck to the bottom. It has 2.5mm of white to prevent any of the green from leeching through. 

There are two print profiles that have been added. One requires an AMS system and one is just a single color print. I also am uploading the STL if you would like to color it yourself in Bambu Lab or anything similar. 

I used Sunlu PLA+ 2.0 for all of the filament.

As always, please leave your comments and suggestions! I love to see the makes of my models so upload some photos too! Thanks!!

Don't own a 3D Printer and are just checking out some cool designs? No problem! This design can be purchased on my Etsy here:

https://www.etsy.com/listing/1851994233/cute-frog-water-dish-for-reptiles-and

*DISCLAIMER*

YOU as a pet owner are responsible for ensuring that the material you are printing with is animal safe. It is not my fault if you neglected to research your printed material and something happens to your pet.