Steam Deck Anker Docking Station Wall Mount

Hello

i created a Wallmount for my SteamDeck Dock
i have the Anker Dock with the dimension 132x72

Therefore i wanted a wall mount to mount the steamdeck besides my TV, out of reach of my toddler.

printed in PETG , i recommend to do so,

tested with 1kg of weight over the weekend to be sure its strong enough

The mount can also be used for other smaller docking stations, if needed i can adjust my model to you dock. i just need to know the dimensions of the dock

its created to have enough room behind the dock for cablemanagement.

the printprofile as well as my model were printed like this:

for time and strength purposes i recommend to print it sideways:

for me it didn't work out since I used a bed slinger, but everyone is invited to try it out.

for the cables i have used a standard ethernet cable, the steamdeck charger and the following HDMI cable:

https://www.ebay.de/itm/266987215699?_skw=hama+hdmi+winkel&epid=1404742021&itmmeta=01JG9AZ5MD3MAH2RF286J3E93M&hash=item3e29ad9b53:g:uzkAAOSwNvNlLkW1&itmprp=enc%3AAQAJAAAA8HoV3kP08IDx%2BKZ9MfhVJKmlsPVLJzfst5aN2VCFLcRQvqrqH5repCG0WJtJBYE8%2BHl9O9rfV23yMlVyO6tYkixsini%2B8TmRW2QLiXioxGmrI6DwyqZ4LBbuoTFIP9cvd%2FF6W04FqO6EimibY6W1BZtVge1rX2FuTJASf3TWzvl2XJE2a94a9AtG638ZwnZ0koe8uc%2B0CD6RYq0GCsRrn5i1jV6SJUTb5Y18guXZPsfl1WYhcAnluai33MPPXEMcs4oWoVhWuZFDtQE--8R2NkLJu55bQ%2FrlY8FMSZZOl2%2BIYW3oT4W7En5u35GF4ET7uw%3D%3D%7Ctkp%3ABFBMtNr8qoJl

have fun printing