I was concerned with the potential risk of water, dust and debris lying on the fuel inlet so decided to design and print the fuel cap for my Ford Ranger 2024 model (should fit from model year 2023) - Photograph shows inlet dimension of 66mm for reference. I printed the fuel cap using eSUN flexible TPE-83A filament in black. Settings I used were 4 perimeters and 40% infill to give solid print. The fuel cap was printed on my trusty Prusa Mk2.5s that is now in its 9th year of service, I used smooth PEI sheet with slight dusting of talcum powder to allow easy removal of the print.
I created the label using Silhouette Studio, printed on Vinyl Matte and then cut with Portrait 3 cutter.
The author marked this model as their own original creation.