Citadel Paint Transfer Tower

This is to allow the transfer of paint from GW/Citadel paint pots to dropper bottles or monument games bottles in a fashion that allows one to do multiple at once.

Did the file back in 2023 and haven't needed it much since, will add better photos next time I transfer paint.

Designed for:

• Funnel (all size pots): https://www.amazon.com/gp/product/B078Z9LWDW?ie=UTF8&psc=1
• Bottles:
  • Standard (12ml) GW Paint's: https://www.amazon.com/gp/product/B00V2C0C7Q?ie=UTF8&psc=1
  • Contrast (18ml) GW paints: https://monumenthobbies.com/products/pro-acryl-empty-bottle-set-22ml

Instructions:

1. Add a small amount of your favorite medium or airbrush thinner
2. Vortex mix… or add a agitator and shake… alot… 
3. Remove the lid from the paint pot, in a fashion that allows you to reattach later if you need to add more medium/thinner and mix again.
   • This can be done either permanently by snipping the hinge off (what I do) or by taking both parts the hinge is connected to off the pot (not recommended, you may send the pot flying).
4. Prep the transfer tower with a funnel, and empty bottle of appropriate size
5. Pour Citadel paint into funnel, ending with the pot resting upside down on the top ring of the transfer tower
6. Leave until flow has essentially stopped
   • you may need to break the tension in funnel with a toothpick or something similar if paint mix is somewhat thick.
7. Peel GW label off paint pot and transfer to new paint bottle